1. We recommend using a rug pad to preserve the life of the rug.

2. One of the best, easiest ways to maintain your rugs is to regularly vacuum any loose dirt that may accumulate before it becomes embedded in the fibers.

3. Use a vacuum or carpet sweeper on a regular basis. If your vacuum has a beater bar, it should be turned off or set to the highest setting to avoid agitating rug fibers.

4. Tend to spills immediately. The quicker you clean spills and stains, the easier they are to remove.

5. For excessive dirt removal from foot traffic, rugs can be power-washed.

1. When first tending to a spill, apply a light mist of mild soap (pH of 5 or lower) and water using a spray bottle. Work the solution into the stain by lightly agitating the surface with a clean, soft towel or sponge. Avoid scrubbing, and do not use a hard-bristled brush or anything else that could damage the rug.

2. Rinse the entire fabric thoroughly to remove all soap residue. Repeat rinsing and blotting until all soap residue is removed.

3. Blot excess moisture with a clean, soft towel or sponge.

4. Air dry.

1. Prepare a solution with one ounce of household bleach and 1/4 ounce of mild soap (pH of 5 or lower) per 16 ounces of water.

2. Spray on the entire area and allow it to soak into the rug for 15 minutes.

3. Blot the entire surface area with a sponge or clean towel.

4. Rinse thoroughly with water only to remove all soap residue.

5. Air dry.

1. Combine 1/4 cup of dishwashing liquid and 1⁄2 cup of white vinegar per gallon of water or use commercial cleaner options such as 303R Multi-Purpose Cleaner or Resolve.

2. Spray on the entire area and allow it to soak into the rug for 15 minutes.

3. Rinse thoroughly with water only to remove all soap residue.

4. Blot the entire surface area with a sponge or clean towel.

5. Air dry.